feat(nixos): remove cobalt

1 files changed, 0 insertions, 145 deletions

diff --git a/nixos/cobalt/configuration.nix b/nixos/cobalt/configuration.nix
deleted file mode 100644
index a3c77da..0000000
--- a/nixos/cobalt/configuration.nix
+++ /dev/null
@@ -1,145 +0,0 @@
-{ config, pkgs, lib, ... }:
-let
-  ipv4 = {
-    address = "95.216.74.104";
-    gateway = "95.216.74.65";
-    netmask = "255.255.255.192";
-    prefixLength = 26; # https://www.pawprint.net/designresources/netmask-converter.php
-  };
-  ipv6 = {
-    address = "2a01:4f9:2b:a98::";
-    gateway = "fe80::1";
-    prefixLength = 64;
-  };
-  networkInterface = "eth0";
-  hostName = "cobalt";
-  hostId = "712ae82a";
-in
-{
-  imports =
-    [
-      ./hardware-configuration.nix
-
-      ./services/acme.nix
-      ./services/nginx.nix
-      ./services/fail2ban.nix
-      ./services/soju.nix
-      ./services/gitolite.nix
-      ./services/git-daemon.nix
-      ./services/cgit.nix
-      ./services/dendrite.nix
-      ./services/akkoma.nix
-    ];
-
-  boot.supportedFilesystems = [ "zfs" ];
-  networking.hostId = hostId;
-
-  boot.loader.grub.enable = true;
-  # boot.loader.grub.version = 2;
-  boot.loader.grub.efiSupport = false;
-  # boot.loader.grub.device = "nodev";
-
-  # This should be done automatically, but explicitly declare it just in case.
-  boot.loader.grub.copyKernels = true;
-  # Make sure that you've listed all of the boot partitions here.
-  boot.loader.grub.mirroredBoots = [
-    { path = "/boot"; devices = [ "/dev/disk/by-id/ata-ST4000NM0245-1Z2107_ZC17GW7G" ]; }
-    { path = "/boot-fallback"; devices = [ "/dev/disk/by-id/ata-ST4000NM0245-1Z2107_ZC17GWB2" ]; }
-  ];
-
-  # Boot normally when one of the boot partitions are missing
-  fileSystems."/boot".options = [ "nofail" ];
-  fileSystems."/boot-fallback".options = [ "nofail" ];
-
-  # Erase your darlings
-  boot.initrd.postDeviceCommands = lib.mkAfter ''
-    zfs rollback -r rpool/local/root@blank
-  '';
-
-  # NOTE: replace these to boot.initrd.availableKernelModules?
-  boot.kernelModules = [ "e1000e" ];
-  boot.initrd.kernelModules = [ "e1000e" ];
-
-  boot.kernelParams = [
-    # See <https:#www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt> for documentation.
-    # ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:<dns0-ip>:<dns1-ip>:<ntp0-ip>
-    # The server ip refers to the NFS server -- not needed in this case.
-    "ip=${ipv4.address}::${ipv4.gateway}:${ipv4.netmask}:${hostName}-initrd:${networkInterface}:off:8.8.8.8"
-  ];
-
-  boot.initrd.network.enable = true;
-  boot.initrd.network.ssh = {
-    enable = true;
-
-    # Using the same port as the actual SSH will cause clients to throw errors
-    # related to host key mismatch.
-    port = 2222;
-
-    # This takes 'path's, not 'string's.
-    hostKeys = [
-      /boot/initrd-ssh-key
-      /boot-fallback/initrd-ssh-key
-    ];
-
-    # Public ssh key to log into the initrd ssh
-    authorizedKeys = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDi7GGOGVj1Y5Sc1EW6zEdrp78dS6hvmS348pqu9dUsB openpgp:0x6BE7BD6F" ];
-  };
-  boot.initrd.network.postCommands = ''
-    cat <<EOF > /root/.profile
-    if pgrep -x "zfs" > /dev/null
-    then
-      zfs load-key -a
-      killall zfs
-    else
-      echo "ZFS is not running -- this could be a sign of failure."
-    fi
-    EOF
-  '';
-
-
-  networking.hostName = hostName;
-
-  networking.useDHCP = false;
-  networking.interfaces.${networkInterface} = {
-    ipv4 = { addresses = [{ address = ipv4.address; prefixLength = ipv4.prefixLength; }]; };
-    ipv6 = { addresses = [{ address = ipv6.address; prefixLength = ipv6.prefixLength; }]; };
-  };
-  networking.defaultGateway = ipv4.gateway;
-  networking.defaultGateway6 = { address = ipv6.gateway; interface = networkInterface; };
-  networking.nameservers = [ "8.8.8.8" ];
-
-  networking.firewall.enable = true;
-
-  time.timeZone = "UTC";
-
-  users.users.root.initialHashedPassword = "";
-  users.users.root.openssh.authorizedKeys.keys = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDi7GGOGVj1Y5Sc1EW6zEdrp78dS6hvmS348pqu9dUsB openpgp:0x6BE7BD6F" ];
-  services.openssh.enable = true;
-  services.openssh.permitRootLogin = "prohibit-password";
-
-  services.openssh.hostKeys = [
-    {
-      path = "/persist/ssh/ssh_host_ed25519_key";
-      type = "ed25519";
-    }
-    {
-      path = "/persist/ssh/ssh_host_rsa_key";
-      type = "rsa";
-      bits = 4096;
-    }
-  ];
-
-  # impermanence requirement
-  fileSystems."/persist".neededForBoot = true;
-
-  sops.defaultSopsFile = ./secrets/secrets.yaml;
-
-  # This value determines the NixOS release from which the default
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It‘s perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "23.05"; # Did you read the comment?
-}
-