diff options
Diffstat (limited to 'home/modules/profiles/base/p10k-config')
| -rw-r--r-- | home/modules/profiles/base/p10k-config/p10k.zsh | 889 |
1 files changed, 512 insertions, 377 deletions
diff --git a/home/modules/profiles/base/p10k-config/p10k.zsh b/home/modules/profiles/base/p10k-config/p10k.zsh index 8705be0..aa6bc2c 100644 --- a/home/modules/profiles/base/p10k-config/p10k.zsh +++ b/home/modules/profiles/base/p10k-config/p10k.zsh @@ -1,16 +1,16 @@ -# Generated by Powerlevel10k configuration wizard on 2020-02-27 at 13:48 UTC. -# Based on romkatv/powerlevel10k/config/p10k-classic.zsh. -# Wizard options: powerline, classic, darkest, time, angled separators, sharp heads, -# flat tails, 2 lines, solid, full frame, compact, concise, transient_prompt, -# instant_prompt=off. +# Generated by Powerlevel10k configuration wizard on 2022-01-02 at 08:00 UTC. +# Based on romkatv/powerlevel10k/config/p10k-lean-8colors.zsh. +# Wizard options: nerdfont-complete + powerline, large icons, unicode, lean_8colors, +# 24h time, 2 lines, disconnected, no frame, sparse, few icons, concise, +# transient_prompt, instant_prompt=verbose. # Type `p10k configure` to generate another config. # -# Config for Powerlevel10k with classic powerline prompt style. Type `p10k configure` to generate +# Config for Powerlevel10k with 8-color lean prompt style. Type `p10k configure` to generate # your own config based on it. # # Tip: Looking for a nice color? Here's a one-liner to print colormap. # -# for i in {0..255}; do print -Pn "%K{$i} %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%8)):#7}:+$'\n'}; done +# for i in {0..255}; do print -Pn "%K{$i} %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done # Temporarily change options. 'builtin' 'local' '-a' 'p10k_config_opts' @@ -20,20 +20,15 @@ 'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand' () { - emulate -L zsh - setopt no_unset extended_glob + emulate -L zsh -o extended_glob - # Unset all configuration options. This allows you to apply configiguration changes without + # Unset all configuration options. This allows you to apply configuration changes without # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`. - unset -m 'POWERLEVEL9K_*' + unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR' + # Zsh >= 5.1 is required. autoload -Uz is-at-least && is-at-least 5.1 || return - zmodload zsh/langinfo - if [[ ${langinfo[CODESET]:-} != (utf|UTF)(-|)8 ]]; then - local LC_ALL=${${(@M)$(locale -a):#*.(utf|UTF)(-|)8}[1]:-en_US.UTF-8} - fi - # The list of segments shown on the left. Fill it with the most important segments. typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=( # =========================[ Line #1 ]========================= @@ -42,7 +37,7 @@ vcs # git status # =========================[ Line #2 ]========================= newline # \n - # prompt_char # prompt symbol + prompt_char # prompt symbol ) # The list of segments shown on the right. Fill it with less important segments. @@ -69,6 +64,8 @@ # dotnet_version # .NET version (https://dotnet.microsoft.com) # php_version # php version (https://www.php.net/) # laravel_version # laravel php framework version (https://laravel.com/) + # java_version # java version (https://www.java.com/) + # package # name@version from package.json (https://docs.npmjs.com/files/package.json) rbenv # ruby version from rbenv (https://github.com/rbenv/rbenv) rvm # ruby version from rvm (https://rvm.io) fvm # flutter version management (https://github.com/leoafarias/fvm) @@ -76,6 +73,8 @@ jenv # java version from jenv (https://github.com/jenv/jenv) plenv # perl version from plenv (https://github.com/tokuhirom/plenv) phpenv # php version from phpenv (https://github.com/phpenv/phpenv) + scalaenv # scala version from scalaenv (https://github.com/scalaenv/scalaenv) + haskell_stack # haskell version from stack (https://haskellstack.org/) kubecontext # current kubernetes context (https://kubernetes.io/) terraform # terraform workspace (https://www.terraform.io) aws # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) @@ -87,10 +86,10 @@ nordvpn # nordvpn connection status, linux only (https://nordvpn.com/) ranger # ranger shell (https://github.com/ranger/ranger) nnn # nnn shell (https://github.com/jarun/nnn) + xplr # xplr shell (https://github.com/sayanarijit/xplr) vim_shell # vim shell indicator (:sh) midnight_commander # midnight commander shell (https://midnight-commander.org/) nix_shell # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) - vi_mode # vi mode (you don't need this if you've enabled prompt_char) # vpn_ip # virtual private network indicator # load # CPU load # disk_usage # disk usage @@ -110,50 +109,18 @@ # example # example user-defined segment (see prompt_example function below) ) - # To enable default icons for all segments, don't define POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION - # or set it to '${P9K_VISUAL_IDENTIFIER}'. - # - # To remove trailing space from all default icons, set POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION - # to '${P9K_VISUAL_IDENTIFIER% }'. - # - # To enable default icons for one segment (e.g., dir), set - # POWERLEVEL9K_DIR_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'. - # - # To assign a specific icon to one segment (e.g., dir), set - # POWERLEVEL9K_DIR_VISUAL_IDENTIFIER_EXPANSION='⭐'. - # - # To assign a specific icon to a segment in a given state (e.g., dir in state NOT_WRITABLE), - # set POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'. - # - # Note: You can use $'\u2B50' instead of '⭐'. It's especially convenient when specifying - # icons that your text editor cannot render. Don't forget to put $ and use single quotes when - # defining icons via Unicode codepoints. - # - # Note: Many default icons cannot be displayed with system fonts. You'll need to install a - # capable font to use them. See POWERLEVEL9K_MODE below. - typeset -g POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}' + # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you. + typeset -g POWERLEVEL9K_MODE=nerdfont-complete + # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid + # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added. + typeset -g POWERLEVEL9K_ICON_PADDING=moderate - # This option makes a difference only when default icons are enabled for all or some prompt - # segments (see POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION above). LOCK_ICON can be printed as - # $'\uE0A2', $'\uE138' or $'\uF023' depending on POWERLEVEL9K_MODE. The correct value of this - # parameter depends on the provider of the font your terminal is using. - # - # Font Provider | POWERLEVEL9K_MODE - # ---------------------------------+------------------- - # Powerline | powerline - # Font Awesome | awesome-fontconfig - # Adobe Source Code Pro | awesome-fontconfig - # Source Code Pro | awesome-fontconfig - # Awesome-Terminal Fonts (regular) | awesome-fontconfig - # Awesome-Terminal Fonts (patched) | awesome-patched - # Nerd Fonts | nerdfont-complete - # Other | compatible - # - # If this looks overwhelming, either stick with a preinstalled system font and set - # POWERLEVEL9K_MODE=compatible, or install the recommended Powerlevel10k font from - # https://github.com/romkatv/powerlevel10k/#recommended-meslo-nerd-font-patched-for-powerlevel10k - # and set POWERLEVEL9K_MODE=nerdfont-complete. - typeset -g POWERLEVEL9K_MODE=powerline + # Basic style options that define the overall look of your prompt. You probably don't want to + # change them. + typeset -g POWERLEVEL9K_BACKGROUND= # transparent background + typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE= # no surrounding whitespace + typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' ' # separate segments with a space + typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR= # no end-of-line symbol # When set to true, icons appear before content on both sides of the prompt. When set # to false, icons go after content. If empty or not set, icons go before content in the left @@ -166,103 +133,92 @@ # Or for a specific segment in specific state: # # POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false - typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT= + typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true # Add an empty line before each prompt. - typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=false + typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true - # Connect left prompt lines with these symbols. You'll probably want to use the same color - # as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below. - typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX='%238F╭─' - typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX='%238F├─' - typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX='%238F╰─' + # Connect left prompt lines with these symbols. + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX= + typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX= + typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX= # Connect right prompt lines with these symbols. - typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX='%238F─╮' - typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX='%238F─┤' - typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX='%238F─╯' - - # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or - # '─'. The last two make it easier to see the alignment between left and right prompt and to - # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false - # for more compact prompt if using using this option. - typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='─' - typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND= + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX= + typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX= + typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX= + + # The left end of left prompt. + typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL= + # The right end of right prompt. + typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL= + + # Ruler, a.k.a. the horizontal line before each prompt. If you set it to true, you'll + # probably want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false above and + # POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' below. + typeset -g POWERLEVEL9K_SHOW_RULER=false + typeset -g POWERLEVEL9K_RULER_CHAR='─' # reasonable alternative: '·' + typeset -g POWERLEVEL9K_RULER_FOREGROUND=7 + + # Filler between left and right prompt on the first prompt line. You can set it to '·' or '─' + # to make it easier to see the alignment between left and right prompt and to separate prompt + # from command output. It serves the same purpose as ruler (see above) without increasing + # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false + # if using this. You might also like POWERLEVEL9K_PROMPT_ADD_NEWLINE=false for more compact + # prompt. + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then - # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE - # ornaments defined above. - typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=238 + # The color of the filler. + typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=7 + # Add a space between the end of left prompt and the filler. + typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=' ' + # Add a space between the filler and the start of right prompt. + typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL=' ' # Start filler from the edge of the screen if there are no left segments on the first line. typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}' # End filler on the edge of the screen if there are no right segments on the first line. typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}' fi - # Default background color. - typeset -g POWERLEVEL9K_BACKGROUND=234 - - # Separator between same-color segments on the left. - typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='%242F\uE0B1' - # Separator between same-color segments on the right. - typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='%242F\uE0B3' - # Separator between different-color segments on the left. - typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR='\uE0B0' - # Separator between different-color segments on the right. - typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR='\uE0B2' - # The right end of left prompt. - typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0' - # The left end of right prompt. - typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2' - # The left end of left prompt. - typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL='' - # The right end of right prompt. - typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL='' - # Left prompt terminator for lines without any segments. - typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL= - #################################[ os_icon: os identifier ]################################## # OS identifier color. - typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=255 - # Make the icon bold. - typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='%B${P9K_CONTENT}' + typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND= + # Custom icon. + # typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='⭐' ################################[ prompt_char: prompt symbol ]################################ - # Transparent background. - typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND= # Green prompt symbol if the last command succeeded. - typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=76 + typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=5 # Red prompt symbol if the last command failed. - typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196 + typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1 # Default prompt symbol. typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯' # Prompt symbol in command vi mode. typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮' # Prompt symbol in visual vi mode. - typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='Ⅴ' + typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V' # Prompt symbol in overwrite vi mode. typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶' typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true # No line terminator if prompt_char is the last segment. - typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL= + typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='' # No line introducer if prompt_char is the first segment. typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL= - # No surrounding whitespace. - typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_{LEFT,RIGHT}_WHITESPACE= ##################################[ dir: current directory ]################################## # Default current directory color. - typeset -g POWERLEVEL9K_DIR_FOREGROUND=31 + typeset -g POWERLEVEL9K_DIR_FOREGROUND=4 # If directory is too long, shorten some of its segments to the shortest possible unique # prefix. The shortened directory can be tab-completed to the original. typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique # Replace removed segment suffixes with this symbol. typeset -g POWERLEVEL9K_SHORTEN_DELIMITER= # Color of the shortened directory segments. - typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=103 + typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=4 # Color of the anchor directory segments. Anchor segments are never shortened. The first # segment is always an anchor. - typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=39 - # Display anchor directory segments in bold. - typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=true + typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=4 + # Set to true to display anchor directory segments in bold. + typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false # Don't shorten directories that contain any of these files. They are anchors. local anchor_files=( .bzr @@ -286,12 +242,19 @@ composer.json go.mod package.json + stack.yaml ) typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})" - # If set to true, remove everything before the last (deepest) subdirectory that contains files - # matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is - # /foo/bar/git_repo/baz, prompt will display git_repo/baz. This assumes that /foo/bar/git_repo - # contains a marker (.git) and other directories don't. + # If set to "first" ("last"), remove everything before the first (last) subdirectory that contains + # files matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is + # /foo/bar/git_repo/nested_git_repo/baz, prompt will display git_repo/nested_git_repo/baz (first) + # or nested_git_repo/baz (last). This assumes that git_repo and nested_git_repo contain markers + # and other directories don't. + # + # Optionally, "first" and "last" can be followed by ":<offset>" where <offset> is an integer. + # This moves the truncation point to the right (positive offset) or to the left (negative offset) + # relative to the marker. Plain "first" and "last" are equivalent to "first:0" and "last:0" + # respectively. typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false # Don't shorten this many last directory segments. They are anchors. typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1 @@ -313,64 +276,83 @@ # the full directory that was used in previous commands. typeset -g POWERLEVEL9K_DIR_HYPERLINK=false - # Enable special styling for non-writable directories. - typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=true - # Show this icon when the current directory is not writable. POWERLEVEL9K_DIR_SHOW_WRITABLE - # above must be set to true for this parameter to have effect. - typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='∅' + # Enable special styling for non-writable directories. See POWERLEVEL9K_LOCK_ICON and + # POWERLEVEL9K_DIR_CLASSES below. + typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v2 - # Custom prefix. - # typeset -g POWERLEVEL9K_DIR_PREFIX='%244Fin ' + # Enable special styling for non-writable and non-existent directories. See POWERLEVEL9K_LOCK_ICON + # and POWERLEVEL9K_DIR_CLASSES below. + typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v3 - # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons for different directories. - # It must be an array with 3 * N elements. Each triplet consists of: + # The default icon shown next to non-writable and non-existent directories when + # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3. + # typeset -g POWERLEVEL9K_LOCK_ICON='⭐' + + # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different + # directories. It must be an array with 3 * N elements. Each triplet consists of: # - # 1. A pattern against which the current directory is matched. Matching is done with + # 1. A pattern against which the current directory ($PWD) is matched. Matching is done with # extended_glob option enabled. # 2. Directory class for the purpose of styling. - # 3. Icon. - # - # Triplets are tried in order. The first triplet whose pattern matches $PWD wins. If there - # are no matches, the directory will have no icon. - # - # Example: - # - # typeset -g POWERLEVEL9K_DIR_CLASSES=( - # '~/work(|/*)' WORK '(╯°□°）╯︵ ┻━┻' - # '~(|/*)' HOME '⌂' - # '*' DEFAULT '') - # - # With these settings, the current directory in the prompt may look like this: + # 3. An empty string. # - # (╯°□°）╯︵ ┻━┻ ~/work/projects/important/urgent + # Triplets are tried in order. The first triplet whose pattern matches $PWD wins. # - # Or like this: + # If POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3, non-writable and non-existent directories + # acquire class suffix _NOT_WRITABLE and NON_EXISTENT respectively. # - # ⌂ ~/best/powerlevel10k - # - # You can also set different colors for directories of different classes. Remember to override - # FOREGROUND, SHORTENED_FOREGROUND and ANCHOR_FOREGROUND for every directory class that you wish - # to have its own color. + # For example, given these settings: # - # typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=31 - # typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=103 - # typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=39 + # typeset -g POWERLEVEL9K_DIR_CLASSES=( + # '~/work(|/*)' WORK '' + # '~(|/*)' HOME '' + # '*' DEFAULT '') + # + # Whenever the current directory is ~/work or a subdirectory of ~/work, it gets styled with one + # of the following classes depending on its writability and existence: WORK, WORK_NOT_WRITABLE or + # WORK_NON_EXISTENT. + # + # Simply assigning classes to directories doesn't have any visible effects. It merely gives you an + # option to define custom colors and icons for different directory classes. + # + # # Styling for WORK. + # typeset -g POWERLEVEL9K_DIR_WORK_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=4 + # + # # Styling for WORK_NOT_WRITABLE. + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_SHORTENED_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_ANCHOR_FOREGROUND=4# + # + # Styling for WORK_NON_EXISTENT. + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_SHORTENED_FOREGROUND=4 + # typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_ANCHOR_FOREGROUND=4 + # + # If a styling parameter isn't explicitly defined for some class, it falls back to the classless + # parameter. For example, if POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND is not set, it falls + # back to POWERLEVEL9K_DIR_FOREGROUND. # typeset -g POWERLEVEL9K_DIR_CLASSES=() + # Custom prefix. + # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin ' + #####################################[ vcs: git status ]###################################### # Branch icon. Set this parameter to '\uF126 ' for the popular Powerline branch icon. typeset -g POWERLEVEL9K_VCS_BRANCH_ICON= - POWERLEVEL9K_VCS_BRANCH_ICON=${(g::)POWERLEVEL9K_VCS_BRANCH_ICON} # Untracked files icon. It's really a question mark, your font isn't broken. # Change the value of this parameter to show a different icon. typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?' - POWERLEVEL9K_VCS_UNTRACKED_ICON=${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON} # Formatter for Git status. # - # Example output: master ⇣42⇡42 *42 merge ~42 +42 !42 ?42. + # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42. # # You can edit the function to customize how Git status looks. # @@ -388,42 +370,57 @@ if (( $1 )); then # Styling for up-to-date Git status. - local meta='%244F' # grey foreground - local clean='%76F' # green foreground - local modified='%178F' # yellow foreground - local untracked='%39F' # blue foreground - local conflicted='%196F' # red foreground + local meta='%f' # default foreground + local clean='%2F' # green foreground + local modified='%3F' # yellow foreground + local untracked='%4F' # blue foreground + local conflicted='%1F' # red foreground else # Styling for incomplete and stale Git status. - local meta='%244F' # grey foreground - local clean='%244F' # grey foreground - local modified='%244F' # grey foreground - local untracked='%244F' # grey foreground - local conflicted='%244F' # grey foreground + local meta='%f' # default foreground + local clean='%f' # default foreground + local modified='%f' # default foreground + local untracked='%f' # default foreground + local conflicted='%f' # default foreground fi local res - local where # branch or tag + if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then - res+="${clean}${POWERLEVEL9K_VCS_BRANCH_ICON}" - where=${(V)VCS_STATUS_LOCAL_BRANCH} - elif [[ -n $VCS_STATUS_TAG ]]; then - res+="${meta}#" - where=${(V)VCS_STATUS_TAG} + local branch=${(V)VCS_STATUS_LOCAL_BRANCH} + # If local branch name is at most 32 characters long, show it in full. + # Otherwise show the first 12 … the last 12. + # Tip: To always show local branch name in full without truncation, delete the next line. + (( $#branch > 32 )) && branch[13,-13]="…" # <-- this line + res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}" fi - # If local branch name or tag is at most 32 characters long, show it in full. - # Otherwise show the first 12 … the last 12. - (( $#where > 32 )) && where[13,-13]="…" - res+="${clean}${where//\%/%%}" # escape % + if [[ -n $VCS_STATUS_TAG + # Show tag only if not on a branch. + # Tip: To always show tag, delete the next line. + && -z $VCS_STATUS_LOCAL_BRANCH # <-- this line + ]]; then + local tag=${(V)VCS_STATUS_TAG} + # If tag name is at most 32 characters long, show it in full. + # Otherwise show the first 12 … the last 12. + # Tip: To always show tag name in full without truncation, delete the next line. + (( $#tag > 32 )) && tag[13,-13]="…" # <-- this line + res+="${meta}#${clean}${tag//\%/%%}" + fi - # Display the current Git commit if there is no branch or tag. - # Tip: To always display the current Git commit, remove `[[ -z $where ]] &&` from the next line. - [[ -z $where ]] && res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}" + # Display the current Git commit if there is no branch and no tag. + # Tip: To always display the current Git commit, delete the next line. + [[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] && # <-- this line + res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}" # Show tracking branch name if it differs from local branch. if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then - res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}" # escape % + res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}" + fi + + # Display "wip" if the latest commit's summary contains "wip" or "WIP". + if [[ $VCS_STATUS_COMMIT_SUMMARY == (|*[^[:alnum:]])(wip|WIP)(|[^[:alnum:]]*) ]]; then + res+=" ${modified}wip" fi # ⇣42 if behind the remote. @@ -449,7 +446,7 @@ # ?42 if have untracked files. It's really a question mark, your font isn't broken. # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon. # Remove the next line if you don't want to see untracked files at all. - (( VCS_STATUS_NUM_UNTRACKED )) && res+=" ${untracked}${POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}" + (( VCS_STATUS_NUM_UNTRACKED )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}" # "─" if the number of unstaged files is unknown. This can happen due to # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower # than the number of files in the Git index, or due to bash.showDirtyState being set to false @@ -472,7 +469,7 @@ # Don't show Git status in prompt for repositories whose workdir matches this pattern. # For example, if set to '~', the Git repository at $HOME/.git will be ignored. - # Multiple patterns can be combined with '|': '~|~/some/dir'. + # Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'. typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~' # Disable the default Git status formatting. @@ -484,23 +481,23 @@ typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1 # Icon color. - typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=76 - typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=244 + typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=2 + typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR= # Custom icon. typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION= # Custom prefix. - # typeset -g POWERLEVEL9K_VCS_PREFIX='%244Fon ' + # typeset -g POWERLEVEL9K_VCS_PREFIX='%fon ' # Show status of repositories of these types. You can add svn and/or hg if you are # using them. If you do, your prompt may become slow even when your current directory # isn't in an svn or hg reposotiry. typeset -g POWERLEVEL9K_VCS_BACKENDS=(git) - # These settings are used for respositories other than Git or when gitstatusd fails and + # These settings are used for repositories other than Git or when gitstatusd fails and # Powerlevel10k has to fall back to using vcs_info. - typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=76 - typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=76 - typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=178 + typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=2 + typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=2 + typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=3 ##########################[ status: exit code of the last command ]########################### # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and @@ -509,25 +506,25 @@ # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as # it will signify success by turning green. - typeset -g POWERLEVEL9K_STATUS_OK=true - typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=70 + typeset -g POWERLEVEL9K_STATUS_OK=false + typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2 typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔' # Status when some part of a pipe command fails but the overall exit status is zero. It may look # like this: 1|0. typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true - typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=70 + typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2 typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔' # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as # it will signify error by turning red. - typeset -g POWERLEVEL9K_STATUS_ERROR=true - typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160 + typeset -g POWERLEVEL9K_STATUS_ERROR=false + typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=1 typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘' # Status when the last command was terminated by a signal. typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true - typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160 + typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=1 # Use terse signal names: "INT" instead of "SIGINT(2)". typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘' @@ -535,40 +532,41 @@ # Status when some part of a pipe command fails and the overall exit status is also non-zero. # It may look like this: 1|0. typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true - typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160 + typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=1 typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘' ###################[ command_execution_time: duration of the last command ]################### - # Show duration of the last command if takes longer than this many seconds. + # Show duration of the last command if takes at least this many seconds. typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3 # Show this many fractional digits. Zero means round to seconds. typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0 # Execution time color. - typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=248 + typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=3 # Duration format: 1d 2h 3m 4s. typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s' # Custom icon. typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION= # Custom prefix. - # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%244Ftook ' + # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook ' #######################[ background_jobs: presence of background jobs ]####################### # Don't show the number of background jobs. typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false # Background jobs color. - typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=37 + typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=1 # Custom icon. - typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='≡' + # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐' #######################[ direnv: direnv status (https://direnv.net/) ]######################## # Direnv color. - typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=178 + typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=3 # Custom icon. # typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ###############[ asdf: asdf version manager (https://github.com/asdf-vm/asdf) ]############### # Default asdf color. Only used to display tools for which there is no color override (see below). - typeset -g POWERLEVEL9K_ASDF_FOREGROUND=66 + # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_FOREGROUND. + typeset -g POWERLEVEL9K_ASDF_FOREGROUND=6 # There are four parameters that can be used to hide asdf tools. Each parameter describes # conditions under which a tool gets hidden. Parameters can hide tools but not unhide them. If at @@ -613,7 +611,7 @@ typeset -g POWERLEVEL9K_ASDF_SHOW_SYSTEM=true # If set to non-empty value, hide tools unless there is a file matching the specified file pattern - # in the current directory, or its parent diretory, or its grandparent directory, and so on. + # in the current directory, or its parent directory, or its grandparent directory, and so on. # # Note: If this parameter is set to empty value, it won't hide tools. # Note: SHOW_ON_UPGLOB isn't specific to asdf. It works with all prompt segments. @@ -626,78 +624,88 @@ typeset -g POWERLEVEL9K_ASDF_SHOW_ON_UPGLOB= # Ruby version from asdf. - typeset -g POWERLEVEL9K_ASDF_RUBY_FOREGROUND=168 + typeset -g POWERLEVEL9K_ASDF_RUBY_FOREGROUND=1 # typeset -g POWERLEVEL9K_ASDF_RUBY_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_RUBY_SHOW_ON_UPGLOB='*.foo|*.bar' # Python version from asdf. - typeset -g POWERLEVEL9K_ASDF_PYTHON_FOREGROUND=37 + typeset -g POWERLEVEL9K_ASDF_PYTHON_FOREGROUND=6 # typeset -g POWERLEVEL9K_ASDF_PYTHON_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_PYTHON_SHOW_ON_UPGLOB='*.foo|*.bar' # Go version from asdf. - typeset -g POWERLEVEL9K_ASDF_GO_FOREGROUND=37 - # typeset -g POWERLEVEL9K_ASDF_GO_VISUAL_IDENTIFIER_EXPANSION='⭐' - # typeset -g POWERLEVEL9K_ASDF_GO_SHOW_ON_UPGLOB='*.foo|*.bar' + typeset -g POWERLEVEL9K_ASDF_GOLANG_FOREGROUND=6 + # typeset -g POWERLEVEL9K_ASDF_GOLANG_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_GOLANG_SHOW_ON_UPGLOB='*.foo|*.bar' # Node.js version from asdf. - typeset -g POWERLEVEL9K_ASDF_NODEJS_FOREGROUND=70 + typeset -g POWERLEVEL9K_ASDF_NODEJS_FOREGROUND=2 # typeset -g POWERLEVEL9K_ASDF_NODEJS_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.foo|*.bar' # Rust version from asdf. - typeset -g POWERLEVEL9K_ASDF_RUST_FOREGROUND=37 + typeset -g POWERLEVEL9K_ASDF_RUST_FOREGROUND=4 # typeset -g POWERLEVEL9K_ASDF_RUST_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_RUST_SHOW_ON_UPGLOB='*.foo|*.bar' # .NET Core version from asdf. - typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_FOREGROUND=134 + typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_FOREGROUND=5 # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_SHOW_ON_UPGLOB='*.foo|*.bar' # Flutter version from asdf. - typeset -g POWERLEVEL9K_ASDF_FLUTTER_FOREGROUND=38 + typeset -g POWERLEVEL9K_ASDF_FLUTTER_FOREGROUND=4 # typeset -g POWERLEVEL9K_ASDF_FLUTTER_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_FLUTTER_SHOW_ON_UPGLOB='*.foo|*.bar' # Lua version from asdf. - typeset -g POWERLEVEL9K_ASDF_LUA_FOREGROUND=32 + typeset -g POWERLEVEL9K_ASDF_LUA_FOREGROUND=4 # typeset -g POWERLEVEL9K_ASDF_LUA_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_LUA_SHOW_ON_UPGLOB='*.foo|*.bar' # Java version from asdf. - typeset -g POWERLEVEL9K_ASDF_JAVA_FOREGROUND=32 + typeset -g POWERLEVEL9K_ASDF_JAVA_FOREGROUND=4 # typeset -g POWERLEVEL9K_ASDF_JAVA_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_JAVA_SHOW_ON_UPGLOB='*.foo|*.bar' # Perl version from asdf. - typeset -g POWERLEVEL9K_ASDF_PERL_FOREGROUND=67 + typeset -g POWERLEVEL9K_ASDF_PERL_FOREGROUND=6 # typeset -g POWERLEVEL9K_ASDF_PERL_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_PERL_SHOW_ON_UPGLOB='*.foo|*.bar' # Erlang version from asdf. - typeset -g POWERLEVEL9K_ASDF_ERLANG_FOREGROUND=125 + typeset -g POWERLEVEL9K_ASDF_ERLANG_FOREGROUND=1 # typeset -g POWERLEVEL9K_ASDF_ERLANG_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_ERLANG_SHOW_ON_UPGLOB='*.foo|*.bar' # Elixir version from asdf. - typeset -g POWERLEVEL9K_ASDF_ELIXIR_FOREGROUND=129 + typeset -g POWERLEVEL9K_ASDF_ELIXIR_FOREGROUND=5 # typeset -g POWERLEVEL9K_ASDF_ELIXIR_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_ELIXIR_SHOW_ON_UPGLOB='*.foo|*.bar' # Postgres version from asdf. - typeset -g POWERLEVEL9K_ASDF_POSTGRES_FOREGROUND=31 + typeset -g POWERLEVEL9K_ASDF_POSTGRES_FOREGROUND=6 # typeset -g POWERLEVEL9K_ASDF_POSTGRES_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_POSTGRES_SHOW_ON_UPGLOB='*.foo|*.bar' # PHP version from asdf. - typeset -g POWERLEVEL9K_ASDF_PHP_FOREGROUND=99 + typeset -g POWERLEVEL9K_ASDF_PHP_FOREGROUND=5 # typeset -g POWERLEVEL9K_ASDF_PHP_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_ASDF_PHP_SHOW_ON_UPGLOB='*.foo|*.bar' + # Haskell version from asdf. + typeset -g POWERLEVEL9K_ASDF_HASKELL_FOREGROUND=3 + # typeset -g POWERLEVEL9K_ASDF_HASKELL_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_HASKELL_SHOW_ON_UPGLOB='*.foo|*.bar' + + # Julia version from asdf. + typeset -g POWERLEVEL9K_ASDF_JULIA_FOREGROUND=2 + # typeset -g POWERLEVEL9K_ASDF_JULIA_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_ASDF_JULIA_SHOW_ON_UPGLOB='*.foo|*.bar' + ##########[ nordvpn: nordvpn connection status, linux only (https://nordvpn.com/) ]########### # NordVPN connection indicator color. - typeset -g POWERLEVEL9K_NORDVPN_FOREGROUND=39 + typeset -g POWERLEVEL9K_NORDVPN_FOREGROUND=6 # Hide NordVPN connection indicator when not connected. typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_CONTENT_EXPANSION= typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_VISUAL_IDENTIFIER_EXPANSION= @@ -706,31 +714,37 @@ #################[ ranger: ranger shell (https://github.com/ranger/ranger) ]################## # Ranger shell color. - typeset -g POWERLEVEL9K_RANGER_FOREGROUND=178 + typeset -g POWERLEVEL9K_RANGER_FOREGROUND=3 # Custom icon. - typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='▲' + # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐' ######################[ nnn: nnn shell (https://github.com/jarun/nnn) ]####################### # Nnn shell color. - typeset -g POWERLEVEL9K_NNN_FOREGROUND=72 + typeset -g POWERLEVEL9K_NNN_FOREGROUND=3 # Custom icon. # typeset -g POWERLEVEL9K_NNN_VISUAL_IDENTIFIER_EXPANSION='⭐' + ##################[ xplr: xplr shell (https://github.com/sayanarijit/xplr) ]################## + # xplr shell color. + typeset -g POWERLEVEL9K_XPLR_FOREGROUND=3 + # Custom icon. + # typeset -g POWERLEVEL9K_XPLR_VISUAL_IDENTIFIER_EXPANSION='⭐' + ###########################[ vim_shell: vim shell indicator (:sh) ]########################### # Vim shell indicator color. - typeset -g POWERLEVEL9K_VIM_SHELL_FOREGROUND=34 + typeset -g POWERLEVEL9K_VIM_SHELL_FOREGROUND=3 # Custom icon. # typeset -g POWERLEVEL9K_VIM_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐' ######[ midnight_commander: midnight commander shell (https://midnight-commander.org/) ]###### # Midnight Commander shell color. - typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_FOREGROUND=178 + typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_FOREGROUND=3 # Custom icon. # typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_VISUAL_IDENTIFIER_EXPANSION='⭐' #[ nix_shell: nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) ]## # Nix shell color. - typeset -g POWERLEVEL9K_NIX_SHELL_FOREGROUND=74 + typeset -g POWERLEVEL9K_NIX_SHELL_FOREGROUND=4 # Tip: If you want to see just the icon without "pure" and "impure", uncomment the next line. # typeset -g POWERLEVEL9K_NIX_SHELL_CONTENT_EXPANSION= @@ -738,11 +752,11 @@ # Custom icon. # typeset -g POWERLEVEL9K_NIX_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐' - ##################################[ disk_usgae: disk usage ]################################## + ##################################[ disk_usage: disk usage ]################################## # Colors for different levels of disk usage. - typeset -g POWERLEVEL9K_DISK_USAGE_NORMAL_FOREGROUND=35 - typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_FOREGROUND=220 - typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_FOREGROUND=160 + typeset -g POWERLEVEL9K_DISK_USAGE_NORMAL_FOREGROUND=2 + typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_FOREGROUND=3 + typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_FOREGROUND=1 # Thresholds for different levels of disk usage (percentage points). typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL=90 typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_LEVEL=95 @@ -751,32 +765,15 @@ # Custom icon. # typeset -g POWERLEVEL9K_DISK_USAGE_VISUAL_IDENTIFIER_EXPANSION='⭐' - ###########[ vi_mode: vi mode (you don't need this if you've enabled prompt_char) ]########### - # Text and color for normal (a.k.a. command) vi mode. - typeset -g POWERLEVEL9K_VI_COMMAND_MODE_STRING=NORMAL - typeset -g POWERLEVEL9K_VI_MODE_NORMAL_FOREGROUND=106 - # Text and color for visual vi mode. - typeset -g POWERLEVEL9K_VI_VISUAL_MODE_STRING=VISUAL - typeset -g POWERLEVEL9K_VI_MODE_VISUAL_FOREGROUND=68 - # Text and color for overtype (a.k.a. overwrite and replace) vi mode. - typeset -g POWERLEVEL9K_VI_OVERWRITE_MODE_STRING=OVERTYPE - typeset -g POWERLEVEL9K_VI_MODE_OVERWRITE_FOREGROUND=172 - # Text and color for insert vi mode. - typeset -g POWERLEVEL9K_VI_INSERT_MODE_STRING= - typeset -g POWERLEVEL9K_VI_MODE_INSERT_FOREGROUND=66 - - # Custom icon. - typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='▲' - ######################################[ ram: free RAM ]####################################### # RAM color. - typeset -g POWERLEVEL9K_RAM_FOREGROUND=66 + typeset -g POWERLEVEL9K_RAM_FOREGROUND=2 # Custom icon. # typeset -g POWERLEVEL9K_RAM_VISUAL_IDENTIFIER_EXPANSION='⭐' #####################################[ swap: used swap ]###################################### # Swap color. - typeset -g POWERLEVEL9K_SWAP_FOREGROUND=96 + typeset -g POWERLEVEL9K_SWAP_FOREGROUND=3 # Custom icon. # typeset -g POWERLEVEL9K_SWAP_VISUAL_IDENTIFIER_EXPANSION='⭐' @@ -784,17 +781,17 @@ # Show average CPU load over this many last minutes. Valid values are 1, 5 and 15. typeset -g POWERLEVEL9K_LOAD_WHICH=5 # Load color when load is under 50%. - typeset -g POWERLEVEL9K_LOAD_NORMAL_FOREGROUND=66 + typeset -g POWERLEVEL9K_LOAD_NORMAL_FOREGROUND=2 # Load color when load is between 50% and 70%. - typeset -g POWERLEVEL9K_LOAD_WARNING_FOREGROUND=178 + typeset -g POWERLEVEL9K_LOAD_WARNING_FOREGROUND=3 # Load color when load is over 70%. - typeset -g POWERLEVEL9K_LOAD_CRITICAL_FOREGROUND=166 + typeset -g POWERLEVEL9K_LOAD_CRITICAL_FOREGROUND=1 # Custom icon. # typeset -g POWERLEVEL9K_LOAD_VISUAL_IDENTIFIER_EXPANSION='⭐' ################[ todo: todo items (https://github.com/todotxt/todo.txt-cli) ]################ # Todo color. - typeset -g POWERLEVEL9K_TODO_FOREGROUND=110 + typeset -g POWERLEVEL9K_TODO_FOREGROUND=4 # Hide todo when the total number of tasks is zero. typeset -g POWERLEVEL9K_TODO_HIDE_ZERO_TOTAL=true # Hide todo when the number of tasks after filtering is zero. @@ -818,7 +815,7 @@ ###########[ timewarrior: timewarrior tracking status (https://timewarrior.net/) ]############ # Timewarrior color. - typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=110 + typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=4 # If the tracked task is longer than 24 characters, truncate and append "…". # Tip: To always display tasks without truncation, delete the following parameter. # Tip: To hide task names and display just the icon when time tracking is enabled, set the @@ -830,8 +827,8 @@ ##############[ taskwarrior: taskwarrior task count (https://taskwarrior.org/) ]############## # Taskwarrior color. - typeset -g POWERLEVEL9K_TASKWARRIOR_FOREGROUND=74 - + typeset -g POWERLEVEL9K_TASKWARRIOR_FOREGROUND=6 + # Taskwarrior segment format. The following parameters are available within the expansion. # # - P9K_TASKWARRIOR_PENDING_COUNT The number of pending tasks: `task +PENDING count`. @@ -850,11 +847,11 @@ ##################################[ context: user@hostname ]################################## # Context color when running with privileges. - typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=178 + typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1 # Context color in SSH without privileges. - typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=180 + typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=7 # Default context color (no privileges, no SSH). - typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=180 + typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=7 # Context format when running with privileges: bold user@hostname. typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%B%n@%m' @@ -870,13 +867,16 @@ # Custom icon. # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐' # Custom prefix. - # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%244Fwith ' + # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%fwith ' ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]### # Python virtual environment color. - typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=37 + typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=6 # Don't show Python version next to the virtual environment name. typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false + # If set to "false", won't show virtualenv if pyenv is already shown. + # If set to "if-different", won't show virtualenv if it's the same as pyenv. + typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_WITH_PYENV=false # Separate environment name from Python version only with a space. typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER= # Custom icon. @@ -884,53 +884,98 @@ #####################[ anaconda: conda environment (https://conda.io/) ]###################### # Anaconda environment color. - typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=37 - # Don't show Python version next to the anaconda environment name. - typeset -g POWERLEVEL9K_ANACONDA_SHOW_PYTHON_VERSION=false - # Separate environment name from Python version only with a space. - typeset -g POWERLEVEL9K_ANACONDA_{LEFT,RIGHT}_DELIMITER= + typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=6 + + # Anaconda segment format. The following parameters are available within the expansion. + # + # - CONDA_PREFIX Absolute path to the active Anaconda/Miniconda environment. + # - CONDA_DEFAULT_ENV Name of the active Anaconda/Miniconda environment. + # - CONDA_PROMPT_MODIFIER Configurable prompt modifier (see below). + # - P9K_ANACONDA_PYTHON_VERSION Current python version (python --version). + # + # CONDA_PROMPT_MODIFIER can be configured with the following command: + # + # conda config --set env_prompt '({default_env}) ' + # + # The last argument is a Python format string that can use the following variables: + # + # - prefix The same as CONDA_PREFIX. + # - default_env The same as CONDA_DEFAULT_ENV. + # - name The last segment of CONDA_PREFIX. + # - stacked_env Comma-separated list of names in the environment stack. The first element is + # always the same as default_env. + # + # Note: '({default_env}) ' is the default value of env_prompt. + # + # The default value of POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION expands to $CONDA_PROMPT_MODIFIER + # without the surrounding parentheses, or to the last path component of CONDA_PREFIX if the former + # is empty. + typeset -g POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION='${${${${CONDA_PROMPT_MODIFIER#\(}% }%\)}:-${CONDA_PREFIX:t}}' + # Custom icon. # typeset -g POWERLEVEL9K_ANACONDA_VISUAL_IDENTIFIER_EXPANSION='⭐' ################[ pyenv: python environment (https://github.com/pyenv/pyenv) ]################ # Pyenv color. - typeset -g POWERLEVEL9K_PYENV_FOREGROUND=37 + typeset -g POWERLEVEL9K_PYENV_FOREGROUND=6 # Hide python version if it doesn't come from one of these sources. typeset -g POWERLEVEL9K_PYENV_SOURCES=(shell local global) # If set to false, hide python version if it's the same as global: # $(pyenv version-name) == $(pyenv global). typeset -g POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide python version if it's equal to "system". + typeset -g POWERLEVEL9K_PYENV_SHOW_SYSTEM=true + + # Pyenv segment format. The following parameters are available within the expansion. + # + # - P9K_CONTENT Current pyenv environment (pyenv version-name). + # - P9K_PYENV_PYTHON_VERSION Current python version (python --version). + # + # The default format has the following logic: + # + # 1. Display just "$P9K_CONTENT" if it's equal to "$P9K_PYENV_PYTHON_VERSION" or + # starts with "$P9K_PYENV_PYTHON_VERSION/". + # 2. Otherwise display "$P9K_CONTENT $P9K_PYENV_PYTHON_VERSION". + typeset -g POWERLEVEL9K_PYENV_CONTENT_EXPANSION='${P9K_CONTENT}${${P9K_CONTENT:#$P9K_PYENV_PYTHON_VERSION(|/*)}:+ $P9K_PYENV_PYTHON_VERSION}' + # Custom icon. # typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ################[ goenv: go environment (https://github.com/syndbg/goenv) ]################ # Goenv color. - typeset -g POWERLEVEL9K_GOENV_FOREGROUND=37 + typeset -g POWERLEVEL9K_GOENV_FOREGROUND=6 # Hide go version if it doesn't come from one of these sources. typeset -g POWERLEVEL9K_GOENV_SOURCES=(shell local global) # If set to false, hide go version if it's the same as global: # $(goenv version-name) == $(goenv global). typeset -g POWERLEVEL9K_GOENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide go version if it's equal to "system". + typeset -g POWERLEVEL9K_GOENV_SHOW_SYSTEM=true # Custom icon. # typeset -g POWERLEVEL9K_GOENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ##########[ nodenv: node.js version from nodenv (https://github.com/nodenv/nodenv) ]########## # Nodenv color. - typeset -g POWERLEVEL9K_NODENV_FOREGROUND=70 - # Don't show node version if it's the same as global: $(nodenv version-name) == $(nodenv global). + typeset -g POWERLEVEL9K_NODENV_FOREGROUND=2 + # Hide node version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_NODENV_SOURCES=(shell local global) + # If set to false, hide node version if it's the same as global: + # $(nodenv version-name) == $(nodenv global). typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide node version if it's equal to "system". + typeset -g POWERLEVEL9K_NODENV_SHOW_SYSTEM=true # Custom icon. # typeset -g POWERLEVEL9K_NODENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ##############[ nvm: node.js version from nvm (https://github.com/nvm-sh/nvm) ]############### # Nvm color. - typeset -g POWERLEVEL9K_NVM_FOREGROUND=70 + typeset -g POWERLEVEL9K_NVM_FOREGROUND=2 # Custom icon. # typeset -g POWERLEVEL9K_NVM_VISUAL_IDENTIFIER_EXPANSION='⭐' ############[ nodeenv: node.js environment (https://github.com/ekalinin/nodeenv) ]############ # Nodeenv color. - typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=70 + typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=2 # Don't show Node version next to the environment name. typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=false # Separate environment name from Node version only with a space. @@ -940,7 +985,7 @@ ##############################[ node_version: node.js version ]############################### # Node version color. - typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=70 + typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=2 # Show node version only when in a directory tree containing package.json. typeset -g POWERLEVEL9K_NODE_VERSION_PROJECT_ONLY=true # Custom icon. @@ -948,7 +993,7 @@ #######################[ go_version: go version (https://golang.org) ]######################## # Go version color. - typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=37 + typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=6 # Show go version only when in a go project subdirectory. typeset -g POWERLEVEL9K_GO_VERSION_PROJECT_ONLY=true # Custom icon. @@ -956,7 +1001,7 @@ #################[ rust_version: rustc version (https://www.rust-lang.org) ]################## # Rust version color. - typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=37 + typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=4 # Show rust version only when in a rust project subdirectory. typeset -g POWERLEVEL9K_RUST_VERSION_PROJECT_ONLY=true # Custom icon. @@ -964,7 +1009,7 @@ ###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################ # .NET version color. - typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=134 + typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=5 # Show .NET version only when in a .NET project subdirectory. typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true # Custom icon. @@ -972,7 +1017,7 @@ #####################[ php_version: php version (https://www.php.net/) ]###################### # PHP version color. - typeset -g POWERLEVEL9K_PHP_VERSION_FOREGROUND=99 + typeset -g POWERLEVEL9K_PHP_VERSION_FOREGROUND=5 # Show PHP version only when in a PHP project subdirectory. typeset -g POWERLEVEL9K_PHP_VERSION_PROJECT_ONLY=true # Custom icon. @@ -980,24 +1025,48 @@ ##########[ laravel_version: laravel php framework version (https://laravel.com/) ]########### # Laravel version color. - typeset -g POWERLEVEL9K_LARAVEL_VERSION_FOREGROUND=161 + typeset -g POWERLEVEL9K_LARAVEL_VERSION_FOREGROUND=1 # Custom icon. # typeset -g POWERLEVEL9K_LARAVEL_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + ####################[ java_version: java version (https://www.java.com/) ]#################### + # Java version color. + typeset -g POWERLEVEL9K_JAVA_VERSION_FOREGROUND=4 + # Show java version only when in a java project subdirectory. + typeset -g POWERLEVEL9K_JAVA_VERSION_PROJECT_ONLY=true + # Show brief version. + typeset -g POWERLEVEL9K_JAVA_VERSION_FULL=false + # Custom icon. + # typeset -g POWERLEVEL9K_JAVA_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ###[ package: name@version from package.json (https://docs.npmjs.com/files/package.json) ]#### + # Package color. + typeset -g POWERLEVEL9K_PACKAGE_FOREGROUND=6 + # Package format. The following parameters are available within the expansion. + # + # - P9K_PACKAGE_NAME The value of `name` field in package.json. + # - P9K_PACKAGE_VERSION The value of `version` field in package.json. + # + # typeset -g POWERLEVEL9K_PACKAGE_CONTENT_EXPANSION='${P9K_PACKAGE_NAME//\%/%%}@${P9K_PACKAGE_VERSION//\%/%%}' + # Custom icon. + # typeset -g POWERLEVEL9K_PACKAGE_VISUAL_IDENTIFIER_EXPANSION='⭐' + #############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]############## # Rbenv color. - typeset -g POWERLEVEL9K_RBENV_FOREGROUND=168 + typeset -g POWERLEVEL9K_RBENV_FOREGROUND=1 # Hide ruby version if it doesn't come from one of these sources. typeset -g POWERLEVEL9K_RBENV_SOURCES=(shell local global) # If set to false, hide ruby version if it's the same as global: # $(rbenv version-name) == $(rbenv global). typeset -g POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide ruby version if it's equal to "system". + typeset -g POWERLEVEL9K_RBENV_SHOW_SYSTEM=true # Custom icon. # typeset -g POWERLEVEL9K_RBENV_VISUAL_IDENTIFIER_EXPANSION='⭐' #######################[ rvm: ruby version from rvm (https://rvm.io) ]######################## # Rvm color. - typeset -g POWERLEVEL9K_RVM_FOREGROUND=168 + typeset -g POWERLEVEL9K_RVM_FOREGROUND=1 # Don't show @gemset at the end. typeset -g POWERLEVEL9K_RVM_SHOW_GEMSET=false # Don't show ruby- at the front. @@ -1007,89 +1076,93 @@ ###########[ fvm: flutter version management (https://github.com/leoafarias/fvm) ]############ # Fvm color. - typeset -g POWERLEVEL9K_FVM_FOREGROUND=38 + typeset -g POWERLEVEL9K_FVM_FOREGROUND=4 # Custom icon. # typeset -g POWERLEVEL9K_FVM_VISUAL_IDENTIFIER_EXPANSION='⭐' ##########[ luaenv: lua version from luaenv (https://github.com/cehoffman/luaenv) ]########### # Lua color. - typeset -g POWERLEVEL9K_LUAENV_FOREGROUND=32 + typeset -g POWERLEVEL9K_LUAENV_FOREGROUND=4 # Hide lua version if it doesn't come from one of these sources. typeset -g POWERLEVEL9K_LUAENV_SOURCES=(shell local global) # If set to false, hide lua version if it's the same as global: # $(luaenv version-name) == $(luaenv global). typeset -g POWERLEVEL9K_LUAENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide lua version if it's equal to "system". + typeset -g POWERLEVEL9K_LUAENV_SHOW_SYSTEM=true # Custom icon. # typeset -g POWERLEVEL9K_LUAENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ###############[ jenv: java version from jenv (https://github.com/jenv/jenv) ]################ # Java color. - typeset -g POWERLEVEL9K_JENV_FOREGROUND=32 + typeset -g POWERLEVEL9K_JENV_FOREGROUND=4 # Hide java version if it doesn't come from one of these sources. typeset -g POWERLEVEL9K_JENV_SOURCES=(shell local global) # If set to false, hide java version if it's the same as global: # $(jenv version-name) == $(jenv global). typeset -g POWERLEVEL9K_JENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide java version if it's equal to "system". + typeset -g POWERLEVEL9K_JENV_SHOW_SYSTEM=true # Custom icon. # typeset -g POWERLEVEL9K_JENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ###########[ plenv: perl version from plenv (https://github.com/tokuhirom/plenv) ]############ # Perl color. - typeset -g POWERLEVEL9K_PLENV_FOREGROUND=67 + typeset -g POWERLEVEL9K_PLENV_FOREGROUND=6 # Hide perl version if it doesn't come from one of these sources. typeset -g POWERLEVEL9K_PLENV_SOURCES=(shell local global) # If set to false, hide perl version if it's the same as global: # $(plenv version-name) == $(plenv global). typeset -g POWERLEVEL9K_PLENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide perl version if it's equal to "system". + typeset -g POWERLEVEL9K_PLENV_SHOW_SYSTEM=true # Custom icon. # typeset -g POWERLEVEL9K_PLENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ############[ phpenv: php version from phpenv (https://github.com/phpenv/phpenv) ]############ # PHP color. - typeset -g POWERLEVEL9K_PHPENV_FOREGROUND=99 + typeset -g POWERLEVEL9K_PHPENV_FOREGROUND=5 # Hide php version if it doesn't come from one of these sources. typeset -g POWERLEVEL9K_PHPENV_SOURCES=(shell local global) # If set to false, hide php version if it's the same as global: # $(phpenv version-name) == $(phpenv global). typeset -g POWERLEVEL9K_PHPENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide php version if it's equal to "system". + typeset -g POWERLEVEL9K_PHPENV_SHOW_SYSTEM=true # Custom icon. # typeset -g POWERLEVEL9K_PHPENV_VISUAL_IDENTIFIER_EXPANSION='⭐' - ################[ terraform: terraform workspace (https://www.terraform.io) ]################# - # POWERLEVEL9K_TERRAFORM_CLASSES is an array with even number of elements. The first element - # in each pair defines a pattern against which the current terraform workspace gets matched. - # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below) - # that gets matched. If you unset all POWERLEVEL9K_TERRAFORM_*CONTENT_EXPANSION parameters, - # you'll see this value in your prompt. The second element of each pair in - # POWERLEVEL9K_TERRAFORM_CLASSES defines the workspace class. Patterns are tried in order. The - # first match wins. - # - # For example, given these settings: - # - # typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=( - # '*prod*' PROD - # '*test*' TEST - # '*' DEFAULT) - # - # If your current terraform workspace is "project_test", its class is TEST because "project_test" - # doesn't match the pattern '*prod*' but does match '*test*'. - # - # You can define different colors, icons and content expansions for different classes: - # - # typeset -g POWERLEVEL9K_TERRAFORM_TEST_FOREGROUND=28 - # typeset -g POWERLEVEL9K_TERRAFORM_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' - # typeset -g POWERLEVEL9K_TERRAFORM_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' - typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=( - # '*prod*' PROD # These values are examples that are unlikely - # '*test*' TEST # to match your needs. Customize them as needed. - '*' DEFAULT) - typeset -g POWERLEVEL9K_TERRAFORM_DEFAULT_FOREGROUND=38 - # typeset -g POWERLEVEL9K_TERRAFORM_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐' + #######[ scalaenv: scala version from scalaenv (https://github.com/scalaenv/scalaenv) ]####### + # Scala color. + typeset -g POWERLEVEL9K_SCALAENV_FOREGROUND=1 + # Hide scala version if it doesn't come from one of these sources. + typeset -g POWERLEVEL9K_SCALAENV_SOURCES=(shell local global) + # If set to false, hide scala version if it's the same as global: + # $(scalaenv version-name) == $(scalaenv global). + typeset -g POWERLEVEL9K_SCALAENV_PROMPT_ALWAYS_SHOW=false + # If set to false, hide scala version if it's equal to "system". + typeset -g POWERLEVEL9K_SCALAENV_SHOW_SYSTEM=true + # Custom icon. + # typeset -g POWERLEVEL9K_SCALAENV_VISUAL_IDENTIFIER_EXPANSION='⭐' + + ##########[ haskell_stack: haskell version from stack (https://haskellstack.org/) ]########### + # Haskell color. + typeset -g POWERLEVEL9K_HASKELL_STACK_FOREGROUND=3 + # Hide haskell version if it doesn't come from one of these sources. + # + # shell: version is set by STACK_YAML + # local: version is set by stack.yaml up the directory tree + # global: version is set by the implicit global project (~/.stack/global-project/stack.yaml) + typeset -g POWERLEVEL9K_HASKELL_STACK_SOURCES=(shell local) + # If set to false, hide haskell version if it's the same as in the implicit global project. + typeset -g POWERLEVEL9K_HASKELL_STACK_ALWAYS_SHOW=true + # Custom icon. + # typeset -g POWERLEVEL9K_HASKELL_STACK_VISUAL_IDENTIFIER_EXPANSION='⭐' #############[ kubecontext: current kubernetes context (https://kubernetes.io/) ]############# # Show kubecontext only when the the command you are typing invokes one of these tools. # Tip: Remove the next line to always show kubecontext. - typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens|kubectx|oc' + typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens|kubectx|oc|istioctl|kogito|k9s|helmfile|fluxctl|stern' # Kubernetes context classes for the purpose of using different colors, icons and expansions with # different contexts. @@ -1114,15 +1187,15 @@ # # You can define different colors, icons and content expansions for different classes: # - # typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_FOREGROUND=28 + # typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_FOREGROUND=3 # typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=( # '*prod*' PROD # These values are examples that are unlikely # '*test*' TEST # to match your needs. Customize them as needed. '*' DEFAULT) - typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=134 - typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='○' + typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=5 + # typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐' # Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext # segment. Parameter expansions are very flexible and fast, too. See reference: @@ -1171,12 +1244,45 @@ POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${${:-/$P9K_KUBECONTEXT_NAMESPACE}:#/default}' # Custom prefix. - # typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%244Fat ' + # typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%fat ' + + ################[ terraform: terraform workspace (https://www.terraform.io) ]################# + # Don't show terraform workspace if it's literally "default". + typeset -g POWERLEVEL9K_TERRAFORM_SHOW_DEFAULT=false + # POWERLEVEL9K_TERRAFORM_CLASSES is an array with even number of elements. The first element + # in each pair defines a pattern against which the current terraform workspace gets matched. + # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below) + # that gets matched. If you unset all POWERLEVEL9K_TERRAFORM_*CONTENT_EXPANSION parameters, + # you'll see this value in your prompt. The second element of each pair in + # POWERLEVEL9K_TERRAFORM_CLASSES defines the workspace class. Patterns are tried in order. The + # first match wins. + # + # For example, given these settings: + # + # typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=( + # '*prod*' PROD + # '*test*' TEST + # '*' OTHER) + # + # If your current terraform workspace is "project_test", its class is TEST because "project_test" + # doesn't match the pattern '*prod*' but does match '*test*'. + # + # You can define different colors, icons and content expansions for different classes: + # + # typeset -g POWERLEVEL9K_TERRAFORM_TEST_FOREGROUND=2 + # typeset -g POWERLEVEL9K_TERRAFORM_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' + # typeset -g POWERLEVEL9K_TERRAFORM_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' + typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=( + # '*prod*' PROD # These values are examples that are unlikely + # '*test*' TEST # to match your needs. Customize them as needed. + '*' OTHER) + typeset -g POWERLEVEL9K_TERRAFORM_OTHER_FOREGROUND=4 + # typeset -g POWERLEVEL9K_TERRAFORM_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐' #[ aws: aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) ]# # Show aws only when the the command you are typing invokes one of these tools. # Tip: Remove the next line to always show aws. - typeset -g POWERLEVEL9K_AWS_SHOW_ON_COMMAND='aws|awless|terraform|pulumi' + typeset -g POWERLEVEL9K_AWS_SHOW_ON_COMMAND='aws|awless|terraform|pulumi|terragrunt' # POWERLEVEL9K_AWS_CLASSES is an array with even number of elements. The first element # in each pair defines a pattern against which the current AWS profile gets matched. @@ -1198,46 +1304,74 @@ # # You can define different colors, icons and content expansions for different classes: # - # typeset -g POWERLEVEL9K_AWS_TEST_FOREGROUND=28 + # typeset -g POWERLEVEL9K_AWS_TEST_FOREGROUND=2 # typeset -g POWERLEVEL9K_AWS_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_AWS_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <' typeset -g POWERLEVEL9K_AWS_CLASSES=( # '*prod*' PROD # These values are examples that are unlikely # '*test*' TEST # to match your needs. Customize them as needed. '*' DEFAULT) - typeset -g POWERLEVEL9K_AWS_DEFAULT_FOREGROUND=208 + typeset -g POWERLEVEL9K_AWS_DEFAULT_FOREGROUND=3 # typeset -g POWERLEVEL9K_AWS_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐' + # AWS segment format. The following parameters are available within the expansion. + # + # - P9K_AWS_PROFILE The name of the current AWS profile. + # - P9K_AWS_REGION The region associated with the current AWS profile. + typeset -g POWERLEVEL9K_AWS_CONTENT_EXPANSION='${P9K_AWS_PROFILE//\%/%%}${P9K_AWS_REGION:+ ${P9K_AWS_REGION//\%/%%}}' + #[ aws_eb_env: aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/) ]# # AWS Elastic Beanstalk environment color. - typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=70 + typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=2 # Custom icon. - typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='eb' + # typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='⭐' ##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]########## # Show azure only when the the command you are typing invokes one of these tools. # Tip: Remove the next line to always show azure. - typeset -g POWERLEVEL9K_AZURE_SHOW_ON_COMMAND='az|terraform|pulumi' + typeset -g POWERLEVEL9K_AZURE_SHOW_ON_COMMAND='az|terraform|pulumi|terragrunt' # Azure account name color. - typeset -g POWERLEVEL9K_AZURE_FOREGROUND=32 + typeset -g POWERLEVEL9K_AZURE_FOREGROUND=4 # Custom icon. - typeset -g POWERLEVEL9K_AZURE_VISUAL_IDENTIFIER_EXPANSION='az' + # typeset -g POWERLEVEL9K_AZURE_VISUAL_IDENTIFIER_EXPANSION='⭐' ##########[ gcloud: google cloud account and project (https://cloud.google.com/) ]########### # Show gcloud only when the the command you are typing invokes one of these tools. # Tip: Remove the next line to always show gcloud. typeset -g POWERLEVEL9K_GCLOUD_SHOW_ON_COMMAND='gcloud|gcs' - # Google cloud color. - typeset -g POWERLEVEL9K_GCLOUD_FOREGROUND=32 - - # Google cloud format. Change the value of POWERLEVEL9K_GCLOUD_CONTENT_EXPANSION if the default - # is too verbose or not informative enough. - # - # P9K_GCLOUD_ACCOUNT: the output of `gcloud config get-value account` - # P9K_GCLOUD_PROJECT: the output of `gcloud config get-value project` - # ${VARIABLE//\%/%%}: ${VARIABLE} with all occurences of '%' replaced with '%%'. - # - typeset -g POWERLEVEL9K_GCLOUD_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT//\%/%%}' + # Google cloud color. + typeset -g POWERLEVEL9K_GCLOUD_FOREGROUND=4 + + # Google cloud format. Change the value of POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION and/or + # POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION if the default is too verbose or not informative + # enough. You can use the following parameters in the expansions. Each of them corresponds to the + # output of `gcloud` tool. + # + # Parameter | Source + # -------------------------|-------------------------------------------------------------------- + # P9K_GCLOUD_CONFIGURATION | gcloud config configurations list --format='value(name)' + # P9K_GCLOUD_ACCOUNT | gcloud config get-value account + # P9K_GCLOUD_PROJECT_ID | gcloud config get-value project + # P9K_GCLOUD_PROJECT_NAME | gcloud projects describe $P9K_GCLOUD_PROJECT_ID --format='value(name)' + # + # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced with '%%'. + # + # Obtaining project name requires sending a request to Google servers. This can take a long time + # and even fail. When project name is unknown, P9K_GCLOUD_PROJECT_NAME is not set and gcloud + # prompt segment is in state PARTIAL. When project name gets known, P9K_GCLOUD_PROJECT_NAME gets + # set and gcloud prompt segment transitions to state COMPLETE. + # + # You can customize the format, icon and colors of gcloud segment separately for states PARTIAL + # and COMPLETE. You can also hide gcloud in state PARTIAL by setting + # POWERLEVEL9K_GCLOUD_PARTIAL_VISUAL_IDENTIFIER_EXPANSION and + # POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION to empty. + typeset -g POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_ID//\%/%%}' + typeset -g POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_NAME//\%/%%}' + + # Send a request to Google (by means of `gcloud projects describe ...`) to obtain project name + # this often. Negative value disables periodic polling. In this mode project name is retrieved + # only when the current configuration, account or project id changes. + typeset -g POWERLEVEL9K_GCLOUD_REFRESH_PROJECT_NAME_SECONDS=60 # Custom icon. # typeset -g POWERLEVEL9K_GCLOUD_VISUAL_IDENTIFIER_EXPANSION='⭐' @@ -1245,7 +1379,7 @@ #[ google_app_cred: google application credentials (https://cloud.google.com/docs/authentication/production) ]# # Show google_app_cred only when the the command you are typing invokes one of these tools. # Tip: Remove the next line to always show google_app_cred. - typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_SHOW_ON_COMMAND='terraform|pulumi' + typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_SHOW_ON_COMMAND='terraform|pulumi|terragrunt' # Google application credentials classes for the purpose of using different colors, icons and # expansions with different credentials. @@ -1270,14 +1404,14 @@ # # You can define different colors, icons and content expansions for different classes: # - # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_FOREGROUND=28 + # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_FOREGROUND=3 # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐' # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_CONTENT_EXPANSION='$P9K_GOOGLE_APP_CRED_PROJECT_ID' typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES=( # '*:*prod*:*' PROD # These values are examples that are unlikely # '*:*test*:*' TEST # to match your needs. Customize them as needed. '*' DEFAULT) - typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_FOREGROUND=32 + typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_FOREGROUND=5 # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐' # Use POWERLEVEL9K_GOOGLE_APP_CRED_CONTENT_EXPANSION to specify the content displayed by @@ -1293,24 +1427,24 @@ # P9K_GOOGLE_APP_CRED_PROJECT_ID | project_id # P9K_GOOGLE_APP_CRED_CLIENT_EMAIL | client_email # - # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurences of '%' replaced by '%%'. + # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced by '%%'. typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_CONTENT_EXPANSION='${P9K_GOOGLE_APP_CRED_PROJECT_ID//\%/%%}' ###############################[ public_ip: public IP address ]############################### # Public IP color. - typeset -g POWERLEVEL9K_PUBLIC_IP_FOREGROUND=94 + typeset -g POWERLEVEL9K_PUBLIC_IP_FOREGROUND=6 # Custom icon. # typeset -g POWERLEVEL9K_PUBLIC_IP_VISUAL_IDENTIFIER_EXPANSION='⭐' ########################[ vpn_ip: virtual private network indicator ]######################### # VPN IP color. - typeset -g POWERLEVEL9K_VPN_IP_FOREGROUND=81 + typeset -g POWERLEVEL9K_VPN_IP_FOREGROUND=3 # When on VPN, show just an icon without the IP address. # Tip: To display the private IP address when on VPN, remove the next line. typeset -g POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION= # Regular expression for the VPN network interface. Run `ifconfig` or `ip -4 a show` while on VPN # to see the name of the interface. - typeset -g POWERLEVEL9K_VPN_IP_INTERFACE='(wg|(.*tun))[0-9]*' + typeset -g POWERLEVEL9K_VPN_IP_INTERFACE='(gpd|wg|(.*tun)|tailscale)[0-9]*' # If set to true, show one segment per matching network interface. If set to false, show only # one segment corresponding to the first matching network interface. # Tip: If you set it to true, you'll probably want to unset POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION. @@ -1320,53 +1454,55 @@ ###########[ ip: ip address and bandwidth usage for a specified network interface ]########### # IP color. - typeset -g POWERLEVEL9K_IP_FOREGROUND=38 + typeset -g POWERLEVEL9K_IP_FOREGROUND=4 # The following parameters are accessible within the expansion: # # Parameter | Meaning - # ----------------------+--------------- - # P9K_IP_IP | IP address - # P9K_IP_INTERFACE | network interface - # P9K_IP_RX_BYTES | total number of bytes received - # P9K_IP_TX_BYTES | total number of bytes sent - # P9K_IP_RX_RATE | receive rate (since last prompt) - # P9K_IP_TX_RATE | send rate (since last prompt) - typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='${P9K_IP_RX_RATE:+%70F⇣$P9K_IP_RX_RATE }${P9K_IP_TX_RATE:+%215F⇡$P9K_IP_TX_RATE }%38F$P9K_IP_IP' + # ----------------------+------------------------------------------- + # P9K_IP_IP | IP address + # P9K_IP_INTERFACE | network interface + # P9K_IP_RX_BYTES | total number of bytes received + # P9K_IP_TX_BYTES | total number of bytes sent + # P9K_IP_RX_BYTES_DELTA | number of bytes received since last prompt + # P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt + # P9K_IP_RX_RATE | receive rate (since last prompt) + # P9K_IP_TX_RATE | send rate (since last prompt) + typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='$P9K_IP_IP${P9K_IP_RX_RATE:+ %2F⇣$P9K_IP_RX_RATE}${P9K_IP_TX_RATE:+ %3F⇡$P9K_IP_TX_RATE}' # Show information for the first network interface whose name matches this regular expression. # Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces. - typeset -g POWERLEVEL9K_IP_INTERFACE='e.*' + typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*' # Custom icon. # typeset -g POWERLEVEL9K_IP_VISUAL_IDENTIFIER_EXPANSION='⭐' #########################[ proxy: system-wide http/https/ftp proxy ]########################## # Proxy color. - typeset -g POWERLEVEL9K_PROXY_FOREGROUND=68 + typeset -g POWERLEVEL9K_PROXY_FOREGROUND=2 # Custom icon. # typeset -g POWERLEVEL9K_PROXY_VISUAL_IDENTIFIER_EXPANSION='⭐' ################################[ battery: internal battery ]################################# # Show battery in red when it's below this level and not connected to power supply. typeset -g POWERLEVEL9K_BATTERY_LOW_THRESHOLD=20 - typeset -g POWERLEVEL9K_BATTERY_LOW_FOREGROUND=160 + typeset -g POWERLEVEL9K_BATTERY_LOW_FOREGROUND=1 # Show battery in green when it's charging or fully charged. - typeset -g POWERLEVEL9K_BATTERY_{CHARGING,CHARGED}_FOREGROUND=70 + typeset -g POWERLEVEL9K_BATTERY_{CHARGING,CHARGED}_FOREGROUND=2 # Show battery in yellow when it's discharging. - typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=178 + typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=3 # Battery pictograms going from low to high level of charge. - typeset -g POWERLEVEL9K_BATTERY_STAGES=('%K{232}▁' '%K{232}▂' '%K{232}▃' '%K{232}▄' '%K{232}▅' '%K{232}▆' '%K{232}▇' '%K{232}█') + typeset -g POWERLEVEL9K_BATTERY_STAGES='\uf58d\uf579\uf57a\uf57b\uf57c\uf57d\uf57e\uf57f\uf580\uf581\uf578' # Don't show the remaining time to charge/discharge. typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false #####################################[ wifi: wifi speed ]##################################### # WiFi color. - typeset -g POWERLEVEL9K_WIFI_FOREGROUND=68 + typeset -g POWERLEVEL9K_WIFI_FOREGROUND=4 # Custom icon. # typeset -g POWERLEVEL9K_WIFI_VISUAL_IDENTIFIER_EXPANSION='⭐' # Use different colors and icons depending on signal strength ($P9K_WIFI_BARS). # # # Wifi colors and icons for different signal strength levels (low to high). - # typeset -g my_wifi_fg=(68 68 68 68 68) # <-- change these values + # typeset -g my_wifi_fg=(4 4 4 4 4) # <-- change these values # typeset -g my_wifi_icon=('WiFi' 'WiFi' 'WiFi' 'WiFi' 'WiFi') # <-- change these values # # typeset -g POWERLEVEL9K_WIFI_CONTENT_EXPANSION='%F{${my_wifi_fg[P9K_WIFI_BARS+1]}}$P9K_WIFI_LAST_TX_RATE Mbps' @@ -1377,19 +1513,15 @@ # Parameter | Meaning # ----------------------+--------------- # P9K_WIFI_SSID | service set identifier, a.k.a. network name - # P9K_WIFI_LINK_AUTH | authentication protocol such as "wpa2-psk" or "none" + # P9K_WIFI_LINK_AUTH | authentication protocol such as "wpa2-psk" or "none"; empty if unknown # P9K_WIFI_LAST_TX_RATE | wireless transmit rate in megabits per second # P9K_WIFI_RSSI | signal strength in dBm, from -120 to 0 # P9K_WIFI_NOISE | noise in dBm, from -120 to 0 # P9K_WIFI_BARS | signal strength in bars, from 0 to 4 (derived from P9K_WIFI_RSSI and P9K_WIFI_NOISE) - # - # All parameters except P9K_WIFI_BARS are extracted from the output of the following command: - # - # /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I ####################################[ time: current time ]#################################### # Current time color. - typeset -g POWERLEVEL9K_TIME_FOREGROUND=66 + typeset -g POWERLEVEL9K_TIME_FOREGROUND=13 # Format for the current time: 09:51:02. See `man 3 strftime`. typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%H:%M:%S}' # If set to true, time will update when you hit enter. This way prompts for the past @@ -1399,15 +1531,15 @@ # Custom icon. typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION= # Custom prefix. - # typeset -g POWERLEVEL9K_TIME_PREFIX='%244Fat ' + # typeset -g POWERLEVEL9K_TIME_PREFIX='%fat ' # Example of a user-defined prompt segment. Function prompt_example will be called on every # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or - # POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and orange text greeting the user. + # POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and green text greeting the user. # # Type `p10k help segment` for documentation and a more sophisticated example. function prompt_example() { - p10k segment -f 208 -i '⭐' -t 'hello, %n' + p10k segment -f 2 -i '⭐' -t 'hello, %n' } # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job @@ -1452,7 +1584,7 @@ # - verbose: Enable instant prompt and print a warning when detecting console output during # zsh initialization. Choose this if you've never tried instant prompt, haven't # seen the warning, or if you are unsure what this all means. - typeset -g POWERLEVEL9K_INSTANT_PROMPT=off + typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized. # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload @@ -1465,5 +1597,8 @@ (( ! $+functions[p10k] )) || p10k reload } +# Tell `p10k configure` which file it should overwrite. +typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a} + (( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]} 'builtin' 'unset' 'p10k_config_opts' |